Rate per mile calculator
Enter what the rate con pays and the miles it takes, empty ones included. You get the linehaul rate, the loaded rate with fuel, and the all-in rate per mile the load really pays.
BY JEFF BYRD· TRUCK DISPATCHER, 8 YEARS IN TRUCKING· HOW WE CHECK
FREE · NO SIGN-UP · LINEHAUL, LOADED, ALL-IN
FROM THE RATE CON
Fuel surcharge is paid
RATE TOTALS · ESTIMATE
- TOTAL PAY
- $2,002
- LINEHAUL RPM
- $2.58
- LOADED RPM (WITH FUEL)
- $3.13
- DEADHEAD
- 14.7%
- ALL-IN RPM
- $2.67
Spread over every mile you drive, the load pays $2.67/mi.
This load works out to $2.67 on every mile you drive. Want a dispatcher negotiating that number up on each rate con you confirm?
Get my loads negotiatedHow the calculator works out your rate per mile
A load has one price but three honest ways to divide it. Brokers usually quote the loaded number. Your bank account feels the all-in number, because the truck burns fuel and time on every mile, paid or not.
FSC $ = FSC per mile x loaded miles (or the flat FSC) TOTAL PAY = linehaul + FSC $ + accessorials LINEHAUL RPM = linehaul / loaded miles LOADED RPM = total pay / loaded miles ALL-IN RPM = total pay / (loaded + empty miles) DEADHEAD % = empty miles / all miles MARGIN = total pay - cost per mile x all miles
ASSUMPTIONS
- Accessorials are money you keep, like detention or a stop-off charge. Leave out lumper reimbursements: they pay back a cost, they aren't income.
- Empty miles are the deadhead from where you are now to the shipper. If you know you'll deadhead home after delivery, add those miles too.
- Miles are practical truck route miles, not the shortest car route. Use the miles from your routing tool if the rate con's miles are short.
- The margin line is optional. Enter your cost per mile from your own books to see what the trip leaves after expenses.
A worked example
EXAMPLE: a van load pays $1,650 linehaul for 640 loaded miles, with a fuel surcharge of 55 cents per loaded mile. You're 110 miles from the shipper. Fuel adds $352, so the load pays $2,002 in total.
The broker will call that a $3.13 load, and on loaded miles it is. Count the 110 empty miles and every mile you drive earns $2.67. That gap is why the same load can be a good deal from one truck stop and a poor one from another.
- LINEHAUL
- $1,650
- FSC 640 x $0.55
- $352
- TOTAL PAY
- $2,002
- LOADED RPM
- $3.13
- ALL-IN RPM
- $2.67
Three rates per mile, and which one to judge a load by
- Linehaul RPM
- The base rate divided by loaded miles. Useful for comparing with market data, which is often reported with fuel taken out.
- Loaded RPM
- Everything the load pays divided by loaded miles. This is the number most brokers say out loud on the phone.
- All-in RPM
- Everything the load pays divided by every mile you drive. The only one that can be compared with your cost per mile.
LINEHAUL
$1,650 / 640 MI
LOADED
$2,002 / 640 MI
ALL-IN
$2,002 / 750 MI
Average rate per mile for truck drivers right now
DAT, which runs one of the largest load boards, publishes national spot averages every week. For the week of August 30 to September 5, 2026, the all-in broker-to-carrier averages including fuel were the figures below. They are national averages across all lanes: your lane, season and equipment can sit far above or below them, and contract freight pays differently from spot.
- Van, all-in per mile
- $2.95
- Reefer, all-in per mile
- $3.54
- Flatbed, all-in per mile
- $3.54
- Van linehaul only
- $2.21
SOURCE: DAT ONE / DAT IQ, BROKER-TO-CARRIER 7-DAY AVERAGES, AUG 30 TO SEPT 5 2026, VIA AJOT (PUBLISHED 2026-09-08)
Using it as a truck load rate calculator
Run the math backwards when a broker asks what you need. Decide the all-in rate your costs require, multiply by all the miles including deadhead, and that's the total to quote. Shippers estimating freight shipping rates can use the same formula from the other side: a carrier prices the whole trip, not just the loaded part. If the broker's offer comes in under your number, counter once with the math in hand, and let it go if they won't move. A load that loses money on paper rarely makes it up on the road.
- TARGET ALL-IN
- $2.80
- ALL MILES
- 750
- QUOTE THE BROKER
- $2,100
$2.80 x 750 miles. Subtract the fuel surcharge if the broker quotes linehaul only.
Reading your result
Set the all-in rate next to your cost per mile. The gap between them is what you get paid to run the truck.
GREEN
Covers costs with room
All-in rate clears your cost per mile by a margin you'd be happy to run all week, and deadhead stays under about 15% of the trip.
AMBER
Thin or empty-heavy
Loaded rate looks fine, but deadhead drags the all-in close to your costs. Worth it only if the delivery sets up a strong reload.
RED
Paying to haul it
All-in rate sits under your cost per mile. Counter the broker, find a closer load, or let it go.
Results are estimates for planning. Market averages are national and change weekly; they are not a quote for any lane.
Free tools for this run
- Trucking Cost Per Mile CalculatorYour fixed and running costs turned into one cost-per-mile number.
- Trip Fuel Cost CalculatorFuel cost for a trip from miles, MPG and regional diesel prices.
- Truck Driver Salary Calculator (by job type & pay model)Weekly and yearly pay from miles, rate and the hours it takes to run them.
Better rates, booked to fit your clock
We push the all-in number up and plan the reload before you deliver. You confirm every load, or turn it down.
Start dispatchEXAMPLE · 49 CFR 395.3 · checked 2026-10-05